Model 8016 16 Inch Inspection Manhole with 10 Inch Fill
LIGHT WEIGHT. LESS MAINTENANCE. LOW SILHOUETTE
NOTE: Not legal for DOT specification cargo tanks.
The 16” Manhole is fabricated for lighter weight and greater strength. The advanced design has low silhouette and clean lines. Fill gasket will not pull out; is easily replaced. To compensate for wear, tension on fill cover is easily adjusted by adding shim washers. Hinge pins welded in place to prevent removal. Adequate means provided for use of seal wire. One outside clamping ring provides means for attaching cover to collar. Cover may be oriented throughout 360°. Secondary Latch is standard on all assemblies.
FVA prefix includes 6238AL normal vent
SPA prefix includes 3006AL vac. vent.
SPS prefix includes 3006SS vac. vent.
SVS prefix includes 6022SS breather vent.
VPA prefix includes Vent Plug Aluminum.
VPB prefix includes Vent Plug Zinc Plt. Steel.
VPD prefix includes Vent Plug 316 Stainless.
Product Details
| Assembly No. | Cover Plate, Fill Gasket Retainer, Shim Washer | Clamping Ring, Fill Cover, Strongback, Latch | Clamping Bolt and Washer | Clamping Bolt Nut | Vent | Weight |
|---|---|---|---|---|---|---|
| FVA8016SXB FVA8016BXB FVA8016GXB FVA8016CXB FVA8016DXB | Steel Steel Zinc Plt. Stnls 304* Stnls 304 Stnls 316 | Steel Steel Zinc Plt. Steel Zinc Plt. Stnls 304 Stnls 304* | Steel Zinc Plt. Steel Zinc Plt. Steel Zinc Plt. Stnls 304 Stnls 304 | Brass Brass Brass Stnls 304 Stnls 304 | Aluminum Aluminum Aluminum Aluminum Aluminum | 20.5 20.5 20.7 20.7 20.7 |
| *Fill Gasket Retainer and Shims-Aluminum **Fill Cover Material-Stainless 316 NOTE: Manhole assemblies, as listed above, have a 6238AL vent (prefix "FVA") and Buna-N gaskets (suffix "B"). For variation or additional vents see catalog Section 95 for proper prefix or assembly number. For variation in gasketing change last letter of suffix as follows. Suffix "V" indicates Viton gasket Suffix "W" indicates White Hypalon gasket Suffix "T" indicates Teflon fill and collar gasket w/ White Hypalon backer Manhole collars are available in aluminum, steel, and stainless steel. Please see parts page for correct numbers. When welding collars to tank, exercise care to insure collar remains flat and round. |
||||||
