Manual Manifold Pressure Style

FABRICATED CONSTRUCTION. WROUGHT MATERIAL. GREATER STRENGTH. GREATER VERSATILITY

The Betts pressure manifold is especially designed for use where bottom loading is to be done through the manifold valves. Design permits compartmental loading or unloading with a minimum number of loading adapters or shut-off valves.

Body is wrought steel or aluminum for strength and low weight. Fabricated construction allows for custom design, which provides greater versatility and simplifies piping layouts.

Bottom loading adapters not included.

PRESSURE & TEMP. RATING: 75 PSI MAWP at ambient temp.

Parts List

Manifold Valve Connections

Product Details

SizeFlanged Inlets Assembly No.Grooved Inlets Assembly No.Weight & MaterialDouble CenterWeight
3"PF503MSBPF603MSB16.0 SteelPC513MS5.0
3"PF503ALBPF603ALB13.0 AluminumPC513AL3.1
4"PF504MSBPF604ALB29.0 SteelPC514MS9.3
4"PF504ALBPF604ALB19.8 AluminumPC514AL4.4
WARNING
Manifold style valves shall not be used where compliance with NFPA385 2-7 is required.
NOTES:
1. Standard valves have buna-N discs, cork/buna-N gasket and non-asbestos packing.
2. See section 5, page 4A for replacements parts.
3. See section 5, page 5B for part numbers and dimensions of available end drains, crossovers, etc.

 

Dimensions

SizeMaterialABCDEGD.C.Flanged Inlet I.D.Flanged Inlet O.D.Flanged Inlet B.C.HolesGroove Inlet & Pipe Size
3"Steel3 1/86 1/45 7/811 5/164 1/84 3/412 1/23 3/85 5/84 7/88- 7/63"
3"Aluminum3 1/86 1/45 7/811 5/165 1/44 11/1612 1/23 3/85 5/84 7/88- 7/63"
4"Steel3 3/47 1/26 7/8124 11/166154 3/86 5/85 7/88- 7/64"
4"Aluminum3 3/47 1/26 7/8125 1/165 1/4154 3/86 5/85 7/88- 7/64"