Product Details
Assembly Number | Flange Dims. | Dimensions | Wt. |
---|---|---|---|
SV916*** | OD: 9.38" [238 mm] BC: 8.13" [206 mm] Holes: 12 - .44" [12 - 11 mm] Thick.: .135" [3.5 mm] | A: 11.69" [297 mm] B: CLOSE 16.69 " [424 mm] OPEN 31.56" [802 mm] C: N/A D: 5.13" [130 mm] E: 4.03" [102 mm] | 30.0 lb. [13.6 kg] |
*** Last three letters of part number designate material of construction as shown below: Example Assembly SV916SSM(Manual 6″ Sliding Valve – 6″ Threaded Pipe x TTMA Flange) |
Material of Construction |
---|
MSM = Steel Body with 316 Stainless Stem & Gates |
SSM = 316 Stainless Body, Stem & Gates |
Flange bolt pattern per TTMA recommendations and grooved outlets per MIL-C-10387B. ** MAWP certified for new valves only. Seat/disc damage or wear may reduce sealable MAWP. |
Repair Kits and Accessories
Additional Options
A heat tube option is available for 4″ and 6″ size by adding suffix “J” to part number.
(Heat tube MAWP = 150 psi)
Body Material | Valve MAWP** | Min. Burst Pressure | Temp. Range |
---|---|---|---|
Steel or Stainless | 50 psi [3.4 bar] | 200 psi [13.8 bar] | -40°F to 500°F [-40°C to 260°C] |
NOTE: Valve should NEVER be heated with flame |
Engineering Bulletins
EB-1-15: Important Notification for Gate/Sliding Valves Used in Hot Service Application
Prop 65
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov. For additional information on Betts products and Proposition 65 list please see: https://www.bettsind.com/prop-65/