|Assembly Number||Flange Dims.||Dimensions||Wt.|
|SV954***||OD: 9.00"  mm)|
BC: 7.50" [191 mm]
Holes: 8 - .75" [8 - 19 mm]
Thick.: .50" [13 mm]
|A: 9.63" [244 mm]|
B: CLOSE 13.00 " [330 mm]
OPEN 24.44" [621 mm]
C: 7.00" [178 mm]
|24.5 lb. [11.1 kg]|
|*** Last three letters of part number designate material of construction as shown below:
(Manual 4″ Sliding Valve – ANSI Flange x ANSI Flange)
|MSM = Steel Body with 316 Stainless Stem & Gates|
|SSM = 316 Stainless Body, Stem & Gates|
|Flange bolt pattern per TTMA recommendations and grooved outlets per MIL-C-10387B.
** MAWP certified for new valves only. Seat/disc damage or wear may reduce sealable MAWP.
Repair Kits and Accessories
A heat tube option is available for 4″ and 6″ size by adding suffix “J” to part number.
(Heat tube MAWP = 150 psi)
|Body Material||Valve MAWP**||Min. Burst Pressure||Temp. Range|
|Steel or Stainless||50 psi [3.4 bar]||200 psi [13.8 bar]||-40°F to 500°F [-40°C to 260°C]|
|NOTE: Valve should NEVER be heated with flame|
EB-1-15: Important Notification for Gate/Sliding Valves Used in Hot Service Application
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov. For additional information on Betts products and Proposition 65 list please see: https://www.bettsind.com/prop-65/