Product Details
| Assembly Number | TTMA Flange Dims. | Sump Flange Dims. | Dimensions | Wt. |
|---|---|---|---|---|
| SV46334*** | OD: 9.00" [229 mm] BC: 8.125" [206 mm] Holes: 12 - .44" [11 mm] Thick.: .50" [13 mm] | OD: 11.00" [299 mm] BC: 9.25" [235 mm] Holes: 12 - .63" [16 mm] Thick.: .50" [13 mm] | A: 9.38" [238 mm] B: 29.25" [743 mm] C: 8.00" [203 mm] D: N/A E: N/A | 91.9 lb. [41.7 kg] |
*** Last three letters of part number designate material of construction as shown below: |
||||
| Material of Construction |
|---|
| MSM = Steel Body with 316 Stainless Stem & Gates |
| SSM = 316 Stainless Body, Stem & Gates |
| Flange bolt pattern per TTMA recommendations and grooved outlets per MIL-C-10387B. ** MAWP certified for new valves only. Seat/disc damage or wear may reduce sealable MAWP. |
Additional Options
Use Suffix “008” for valve less actuator. A heat tube option is available by adding a suffix “J” to end of part number. (Heat tube MAWP = 150 psi)
| Body Material | Valve MAWP** | Min. Burst Pressure | Temp. Range |
|---|---|---|---|
| Steel or Stainless | 50 psi [3.4 bar] | 200 psi [13.8 bar] | -40°F to 500°F [-40°C to 260°C] |
| NOTE: Valve should NEVER be heated with flame | |||
Installation & Maintenance
See Bulletins and Parts List Page.
Prop 65
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov. For additional information on Betts products and Proposition 65 list please see: https://www.bettsind.com/prop-65/




