Guardian™ 407/412 Pressure Relief Valve, 3″ and 4″ ANSI Flange Conection
The Betts’ Guardian™ vent is a spring-loaded reclosing pressure relief device/valve for use on a cargo tank’s primary pressure relief system. The pressure relief valve is designed, tested and marked in accordance with US DOT 49CFR §178.345-10, §178.347-4 and §178.348-4. The body and O-ring holder are constructed of 316L stainless steel with PTFE standard seals for compatibility with a wide range of products and temperatures.
- Available ECTFE (Halar®) lined/coated
- 3” or 4” ANSI flange mounting
- Compact optimized flow design
- Seal tabs on shroud and body
- Multiple seal material options
Minimum Bursting Pressure: 200 psi [13.8 bar]
Product Details
| Part Number | Size and Connection | Weight lbs. [kg] |
|---|---|---|
| RVP3A*-** | 3” Pressure Relief w/ 3” ANSI Flange Flange Bolt Pattern: 4 - Ø.75” holes on 6.0” B.C. | 19.5 [8.5] |
| RVP4A*-** | 4” Pressure Relief w/ 4” ANSI Flange Flange Bolt Pattern: 8 - Ø.75” holes on 7.5” B.C. | 21.0 [9.5] |
| - An Example of a part number would be RVP3AT-25. This would have PTFE seals and be used on a 25 MAWP tank. - Part numbers with ECTFE (Halar®) coating as follows: RVPL3A*-**. "L" indicates ECTFE coated. - Values shown are test values. Actual results may vary due to service conditions. |
||
| * Seal Material Code | Material | Temp. Range |
|---|---|---|
| T | PTFE | -40°F to +400°F [-40°C to +204°C] |
| F | Fluorosilicone | -50°F to +350°F [-45°C to +176°C] |
| K | Kalrez | -20°F to +400°F [-28°C to +204°C] |
| VB | FKM BLT | -15°F to +400°F [-26°C to +204°C] |
| Valve Size | ** Code Tank MAWP | Set Pressure | Rated Air Flow Capacity (out-breathing) | Water Flow Rate |
|---|---|---|---|---|
| 3" | 25 psig. [1.72 bar] | 30 psig [2.06 bar] | 379,462 SCFH @ 40 psig [10,745 SCMH @ 2.75 bar] | 980 gpm @ 40 psig. |
| 3" | 25 psig. [1.72 bar] | 30 psig [2.06 bar] | 409,558 SCFH @ 45 psig [11,597 SCMH @ 3.10 bar] | 1050 gpm @ 45 psig. |
| 3" | 30 psig. [2.06 bar] | 36 psig [2.48 bar] | 409,558 SCFH @ 45 psig [11,597 SCMH @ 3.10 bar] | 1050 gpm @ 45 psig. |
| 3" | 35 psig. [2.41 bar] | 42 psig [2.89 bar] | 457,740 SCFH @ 52.5 psig [12,961 SCMH @ 3.62 bar] | 1075 gpm @ 52.5 psig. |
| 3" | 40 psig. [2.75 bar] | 48 psig [3.31 bar] | 514,539 SCFH @ 60 psig [14,570 SCMH @ 4.13 bar] | 1100 gpm @ 60 psig. |
| 4" | 25 psig. [1.72 bar] | 30 psig [2.06 bar] | 389,482 SCFH @ 40 psig [11,028 SCMH @ 2.75 bar] | 1000 gpm @ 40 psig. |
| 4" | 25 psig. [1.72 bar] | 30 psig [2.06 bar] | 432,563 SCFH @ 45 psig [12,248 SCMH @ 3.10 bar] | 1100 gpm @ 45 psig. |
| 4" | 30 psig. [2.06 bar] | 36 psig [2.48 bar] | 432,563 SCFH @ 45 psig [12,248 SCMH @ 3.10 bar] | 1100 gpm @ 45 psig. |
| 4" | 35 psig. [2.41 bar] | 42 psig [2.89 bar] | 496,955 SCFH @ 52.5 psig [14,072 SCMH @ 3.62 bar] | 1150 gpm @ 52.5 psig. |
| 4" | 40 psig. [2.75 bar] | 48 psig [3.31 bar] | 564,486 SCFH @ 60 psig [15,984 SCMH @ 4.13 bar] | 1200 gpm @ 60 psig. |
| Replace ** in Part Number to Designate Cargo Tank MAWP in PSIG | ||||
| Notes: 1) Values shown are test values. Actual results may vary due to service conditions. 2) Set pressure is defined as point at which continuous flow is seen, felt or heard around the seat area. (nomenclature per ASME Section XII Part TR-110 and TTMA TB-126.) |
||||
Installation and Maintenance Manual
MM-RV002 – INSTALLATION AND MAINTENANCE MANUAL FOR 407/412 P/V/C GUARDIAN VENT
Seal Kits & Accessories
Seal Kit part number: SK-RVPT*
*Mounting gasket not included in seal kit
Spanner wrench part number: 75825EY
Dis-assembly wrench number : 75819ZC
Prop 65
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov. For additional information on Betts products and Proposition 65 list please see: https://www.bettsind.com/prop-65/