ASME, 10″, 4 Hold Down, 100 psi MAWP, Model 8369, 10″ High Collar

  • 6” OR 10” HIGH COLLAR

This Tiona 10” Pressure Fill conforms to the requirements of the ASME code for pressure vessels Section VIII, Division 1.


Product Details

Assembly No.Weld CollarCoverWing-Nut, Swing Bolts Hinge PinsNumber Hold Downs* Working PressureWeight
8369ASW-10"AluminumSteelStnls 3044100 PSI [6.8 BAR]19.5 lb [8.86 kg]
8369ALW-10"AluminumStnls 316LStnls 3044100 PSI [6.8 BAR]19.5 lb [8.86 kg]
8369SCW-10"SteelSteelStnls 3044100 PSI [6.8 BAR]35.5 lb [16.12 kg]
8369LCW-10"Stnls 316LStnls 316LStnls 3044100 PSI [6.8 BAR]35.5 lb [16.12 kg]
Canadian Registration Number OH3119.0123456789
Notes: While Hypalon gasket furnished as standard (reference suffix "W" in assembly number). For other gaskets available, see parts page for correct suffix.

* Tests were conducted and ratings determined with homogeneous gaskets.

During instaallation and welding the collars to the tanks, care should be exercised to insure the collars remain flat and round in order to assure proper performance. If necessary a welding fixture should be used to prevent distortion.

Repair Kits and Accessories

ASME Replacement Swing-bolt / Wing-nut Assemblies

Installation & Maintenance

MM-MH001: Full Opening Manhole Installation and Maintenance Manual

Engineering Bulletins

EB3-99: Installation and Care Instructions for Teflon Encapsulated Square Gaskets for Tiona-Betts Full Opening Manholes

EB-07-03: Maintenance and Use of Betts Full Opening Pressure Manhole