ADR/EN 500 mm Bolted Manhole Layout 8547 with Model PAF 7545 PRV

Model EPVE8547 incorporates a bolted ∅500mm (∅195/8”) manhole with a ∅254mm (∅10”) PAF 7545 pressure relief valve (PRV) and a 6866AL normal vent.

Regulation Requirements
The manhole assembly conforms to ADR 2021, EN13314:2002, EN13317:2002, EN14595:2016, EN14596:2005, SANS 1518:2008 and AS2809.2-2008 drop test requirements.

Manhole Specification
The manhole has an industry standard 24-hole bolt pattern sized for M8 bolts. The cover has provisions for a threaded style vapor recovery vent and overfill protection sensor. Manhole cover material conforms to the minimum 12% elongation code requirement.

Emergency Venting
The emergency pressure relief device opens to relieve excess pressure within the tank compartment and closes when the excess pressure has been relieved. See technical specification chart below for cracking pressure and flow capacities. The pressure relief valve also serves as a quick open inspection hatch that incorporates a secondary safety catch that enables internal pressure to escape prior to the latch being fully released.

Normal Venting
PPVL models come standard with a 6866AL pressure/vacuum vent (normal vent). The unique design of the p/v vent incorporates rollover protection to help retain product at any tank orientation.

Part List

Product Details

Part #Manhole CoverPRV CoverP/V Vent (6705AL)Strongback and LatchWeight
EPVE8547AX*AluminumE-CoatedAluminumZinc Plated Steel10.4 kg [23 lbs.]
EPVE8547AX*092AluminumE-CoatedAluminum304 Stainless10.4 kg [23 lbs.]
* Last letter of part number designates seal material. See material table below.
  • Option available for padlock loop installed in strongback.
  • Option available for 6234AL inbreathing vent installed in addition to P/V Vent.
  • Weld Collar NOT included with assembly, but available separately part number 6777 _ _. Weld Collar material should correspond with tank shell material. When welding collars to tank, care should be taken to insure collar remains flat and round. If necessary, a welding fixture should be used to prevent distortion.
LetterMaterialTemp. Range
BBuna-N-20°C to +100°C
MCork Buna-10°C to +100°C
VFKM-10°C to +100°C

Technical Specifications

7545 Pressure Relief ValveP/V Vent {6866AL Normal Vent)
OpensAir Flow Cap.
(Cubic meters per hour)
Pressure OpensPressure Flow CapVacuum OpensVacuum Flow Cap
25 kPa (3.63 psig)7.049 SCMH @ 35 kPa
(250,000 SCFH @ 5.1 psig)
6.8 kPa
(1 psig)
42 SCMH @ 30 kPa
(1,483 SCFH @ 4.35 psig)
1.5 kPA
(.22 psig)
26 SCMH @ 3 kPa
(918 SCFH @ .44 psig)