4″ Drain Sump Gasket (TTMA)
Betts flange gaskets are available in a variety of compounds in order to satisfy a wide range of service requirements. The full-face gaskets are ideal for low-torque sealing applications on sumps, valve flanges and piping flanges. Bolt-hole patterns are in accordance with TTMA recommended practice. Depending on gasket size, all materials may not be available.
Product Details
| Part No. | I.D. | O.D. | B.C. | # of Holes | Hole Dia. |
|---|---|---|---|---|---|
| G15266 * * | 6.13" [155.6 mm] | 8.25" [209.6 mm] | 7.25" [184.2 mm] | 8 | .56" [14.2 mm] |
| G75346TF | 5.81" [147.6 mm] | 8.25" [209.6 mm] | 7.25" [184.2 mm] | 8 | .56" [14.2 mm] |
| G75346TF-MIL | 6.00" [152.4 mm] | 8.25" [209.6 mm] | 7.25" [184.2 mm] | 8 | .56" [14.2 mm] |
| ** Material Code | Material Description | Thickness (T) | Temp. Range |
|---|---|---|---|
| CB | Cork Buna | .09" [2.3 mm] Note: 8" & 12" Sump = .13" [3.3 mm] | 14 to 231°F (-10 to 110°C) |
| BN | Nitrile (Buna-N) | .125" [3.2 mm] | -40 to 230°F (-40 to 110°C) |
| VB | FKM Type B (Viton® B) | .125" [3.2 mm] | -20 to 400°F (-29 to 204°C) |
| NA | Non-Asbestos - Aramid fibers w/ NBR binder | .09" [2.3 mm] | -65 to 750°F (-54 to 399°C) |
| TD | PTFE w/ Inorganic Fillers (One piece solid gasket) | .063" [1.6 mm] | -350 to 520°F (-212 to 271°C) |
| TF | Slit Style PTFE Envelope w/ Non-asbestos Core | .17" [4.3 mm] | -65 to 400°F (-54 to 204°C) |
| TF-MIL | Mil Style PTFE Envelope w/ Non-asbestos Core | .17" [4.3 mm] | -65 to 400°F (-54 to 204°C) |
| Notes: To achieve maximum sealing capability, proper star pattern tightening sequence must be followed. PTFE gaskets require re-torque after initial installation. Flange surfaces must be flat and free of scratches, damage or corrosion. | |||
