Product Details
Assembly Number | Body Material | Dimensions | Maximum Working Pressure | Weight |
---|---|---|---|---|
WD321AL* | Aluminum | A: 6 3/4" (171.5 mm) B: 5 5/16" (134.9 mm) C: 1 3/4" (44.5 mm) O.D.: 5 5/8" (142.9 mm) I.D.: 3 3/8" (85.7 mm) | 75 psi (5.17 bar) | 5.1 lbs. (2.31 kg) |
WD321GI* | Cast Iron | A: 6 3/4" (171.5 mm) B: 5 5/16" (134.9 mm) C: 1 3/4" (44.5 mm) O.D.: 5 5/8" (142.9 mm) I.D.: 3 3/8" (85.7 mm) | 75 psi (5.17 bar) | 11.0 lbs. (4.99 kg) |
* Replace asterisk in part number to designate disc coating. Example Assembly WD321ALWB(3″ Wet-R-Dri Aluminum + White FDA Nitrile) |
Seal Materials | Temperature Range |
---|---|
B = Black Nitrile (Buna-N) | -40°F to +240°F (-40°C to +116°C) |
WB = White FDA Nitrile (Buna-N) | -40°F to +240°F (-40°C to +116°C) |
OP = White FDA Nitrile with SS Insert | -40°F to +240°F (-40°C to +116°C) |
VB = FKM (Viton™ B) Type B | +9°F to +400°F (-13°C to +204°C) |
VF = FKM GFLT-S | -11°F to +400°F (-24°C to +204°C) |
V= FKM (Viton™ A) Type A | -0°F to +400°F (-17°C to +204°C) |
U = Black Urethane | -40°F to +200°F (-40°C to +93°C) |
E = Black EPDM | -50°F to +250°F (-45°C to +121°C) |
WE = White EPDM | -50°F to +250°F (-45°C to +121°C) |
Not all materials are available for every size. Actual temperature values may vary due to service conditions. |
Repair Kits and Accessories
Additional Options
Betts prides itself in being able to provide products that meet a customer’s specific needs. As a result we do offer modifications to our product standards. While not every request is always feasible, we do our best to meet your specific needs. In many cases this modification is noted by adding a suffix to the end of the standard part number. The following is a non-inclusive list of common options that are available for this product line . If the options listed below do not meet your requirements please contact one of Betts’ Customer Service Representatives for further assistance. Please note that some product modifications may result in extended lead times.
Commonly used Suffixes
(add to end of assembly number)
001 = E-Coated Valve Body
002 = Grease Fittings in shafts
004 = Valve less handle
019 = SS Shafts w/ SS Liner
032 = Left Hand Operation
046 = E-Coated Valve Left Hand Operation
089 = 225 psi tested w/ Fluorosilicone O-rings
Installation & Maintenance
Installation: The Wet-R-Dri Valve may be mounted in any position with a handle located for easy operation. Standard right-hand operation opens by turning handle ¼ turn counterclockwise and left-hand operation (clockwise opening) is available for valve with the suffix “032”. Care should be taken when mounting the valve to be sure the I.D. of adjoining flanges or pipe is large enough to allow the disc of the valve to open freely. Valve mounts between 125# or 150# ASA/ANSI flanges.
Prop 65
WARNING: This product can expose you to chemicals including Chromium (hexavalent compounds) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov. For additional information on Betts products and Proposition 65 list please see: https://www.bettsind.com/prop-65/