1800 Pennsylvania Ave. West Warren, PA 16365

1-800-831-7160 | info@bettsind.com

Pneumatic Operated Wet-R-Dri Butterfly Valve (100 psi MAWP Certified)
Print this page.
click image to zoom

This special certified valve has a test pressure of 150 psi and is marked with an MAWP of 100 psi on the side of the valve body.
Currently available in style and sizes:
2″ with P/N WD219ALVB185
3″ with P/N WD319ALVB185
4″ with P/N WD419ALVB185

The Betts Wet-R-Dri Valve is a lightweight and compact quarter turn in-line stop valve. This easily maintained and versatile valve is widely used for liquid, gaseous or dry products and is available in a variety of sizes.  This valve comes with an actuator that opens and closes the valve and provides a visual indicator that clearly shows the orientation of the valve disc.  The actuator for model style “19” is air-open/spring-close.

The body is offered in aluminum, cast iron or stainless-lined with coatings available for increased chemical resistance and extended service life.  The actuator is e-coated aluminum with a robust fiberglass cylinder.  The disc seal and shaft O-rings are available in a variety of materials to optimize chemical resistance and service temperature range.  The bolt pattern matches TTMA piping flange dimensions.

Valve MAWP = 100 psig (6.9 bar)
Air cylinder max pressure = 150 psig (10 bar)
Hydraulic cylinder max pressure = 3,000 psig (207 bar)
Actuator max temperature = 240°F (116ºC)

Installation: The Wet-R-Dri Valve may be mounted in any position.  Care should be taken when mounting valve to be sure the I.D. of adjoining flanges or pipe is large enough to allow the disc of the valve to open freely.  It is recommended to use Betts flanges and adapters shown in Section 20, Page 5A.

Prop 65 Chromium

Prop 65 Chromium

For additional information on Betts products and Proposition 65 list please see: https://www.bettsind.com/proposition-65/