1800 Pennsylvania Ave. West Warren, PA 16365

1-800-831-7160 | info@bettsind.com

Pneumatic & Hydraulic Operated 12″ Wet-R-Dri Butterfly Valve (non-TTMA)
Print this page.
click image to zoom

The Betts 12” Wet-R-Dri Valve is a quarter turn in-line stop valve that is comparatively lightweight and compact for its large thru area. This easily maintained and versatile valve is widely used for liquid, gaseous or dry products.  This valve comes with an actuator that opens and closes the valve and provides a visual indicator that clearly shows the orientation of the valve disc.  The actuator is available in various styles:

The body is offered in aluminum or aluminum with stainless liner.  Body coatings are available for increased chemical resistance and extended service life.  Grease fittings come standard for drive shaft and bearing shaft.  The actuator is e-coated aluminum with a robust fiberglass cylinder.  The disc seal and shaft O-rings are available in a variety of materials to optimize chemical resistance and service temperature range.

Air cylinder max pressure = 150 psig (10 bar)
Hydraulic cylinder max pressure = 3,000 psig (207 bar)
Actuator max temperature 240°F (116°C)

Installation: The Wet-R-Dri Valve may be mounted in any position.  Care should be taken when mounting valve to be sure the I.D. of adjoining flanges or pipe is large enough to allow the disc of the valve to open freely.

Prop 65 Chromium

Betts prides itself in being able to provide products that meet a customer’s specific needs. As a result we do offer modifications to our product standards. While not every request is always feasible, we do our best to meet your specific needs. In many cases this modification is noted by adding a suffix to the end of the standard part number.  The following is a non-inclusive list of common options that are available for this product line .  If the options listed below do not meet your requirements please contact one of Betts’ Customer Service Representatives for further assistance. Please note that some product modifications may result in extended lead times.

Commonly Requested Options:
= E-coated valve body
= Actuator mounted normally open
= SS shafts w/ SS valve liner
= Actuator mounted normally open w/ E-coated body
106 = SS shafts w/ SS valve liner w/ E-coated body

Prop 65 Chromium

For additional information on Betts products and Proposition 65 list please see: https://www.bettsind.com/proposition-65/