1800 Pennsylvania Ave. West Warren, PA 16365

1-800-831-7160 | info@bettsind.com

Manually Operated ASA/ANSI Detent Wet-R-Dri Butterfly Valve
Print this page.

The Betts Wet-R-Dri Valve is a lightweight and compact quarter turn in-line stop valve. This easily maintained and versatile valve is widely used for liquid, gaseous or dry products and is available in a variety of sizes.  The manual detent model provides a positive stop in the open and closed position as well as a detent spring and ball which assist in holding the disc in the open or closed position. The body is offered in aluminum, cast iron or stainless lined with coatings available for increased chemical resistance and extended service life.  The disc seal and shaft O-rings are available in a variety of materials to optimize chemical resistance and service temperature range. Valve mounts between 125# or 150# ASA/ANSI flanges.

See Section 20 Page 5B for repair kits.
See Section 21 Page 1B for complete parts list.

Installation: The Wet-R-Dri Valve may be mounted in any position with handle located for easy operation.  Standard right-hand operation opens by turning handle ¼ turn counterclockwise and left-hand operation (clockwise opening) is available for valve with suffix “032”. Care should be taken when mounting valve to be sure the I.D. of adjoining flanges or pipe is large enough to allow the disc of the valve to open freely.  Valve mounts between 125# or 150# ASA/ANSI flanges.

Prop 65 Chromium

 

Betts prides itself in being able to provide products that meet a customer’s specific needs. As a result we do offer modifications to our product standards. While not every request is always feasible, we do our best to meet your specific needs. In many cases this modification is noted by adding a suffix to the end of the standard part number.  The following is a non-inclusive list of common options that are available for this product line .  If the options listed below do not meet your requirements please contact one of Betts’ Customer Service Representatives for further assistance. Please note that some product modifications may result in extended lead times.

Commonly used Suffixes
(add to end of assembly number)
001 = E-Coated Valve Body
002 = Grease Fittings in shafts
004 = Valve less handle
019 = SS Shafts w/ SS Liner
032 = Left Hand Operation
046 = E-Coated Valve Left Hand Operation
089 = 225 psi tested w/ Fluorosilicone O-rings

Prop 65 Chromium

For additional information on Betts products and Proposition 65 list please see: https://www.bettsind.com/proposition-65/